Simrad Micro-C Female to SimNet Cable – 1M

Connects an XID Airmar CHIRP Transducer with a 9 Pin black connector to the older 7 pin blue sockets on displays and echosounder modules. For use with Airmar 9pin XID Transducers.

Enhance your marine electronics setup with the Simrad Micro-C Female to SimNet Cable, a reliable 1-meter adapter designed for seamless integration between NMEA 2000 devices and SimNet networks. This specialized cable features a female Micro-C connector on one end, perfect for connecting compact NMEA 2000 sensors or displays, and a SimNet backbone connector on the other, ensuring high-speed data transmission across your Simrad ecosystem.

Why This Cable Matters in Modern Boating Systems

In the world of marine navigation, compatibility is key to unlocking the full potential of your multifunction displays, autopilots, and sensors. SimNet, Simrad’s proprietary networking protocol, offers superior bandwidth and plug-and-play simplicity compared to standard NMEA 2000 setups. However, many third-party or legacy devices still rely on Micro-C connectors. This cable bridges that gap, allowing you to incorporate diverse equipment without complex rewiring or additional terminators.

Built to withstand harsh saltwater environments, it features rugged, waterproof construction that resists corrosion and vibration. Whether you’re upgrading an older Simrad system or expanding with NMEA 2000 accessories like depth sounders, GPS antennas, or engine data interfaces, this cable delivers drop-in reliability.

Key Features and Technical Specs

• Length: Precisely 1 meter (3.3 feet) for tidy installations in tight console spaces.
• Connectors: Female Micro-C (NMEA 2000 compliant) to male SimNet – no adapters needed.
• Durability: IP67-rated waterproof seals and UV-resistant jacket for long-term exposure to sun, spray, and submersion.
• Performance: Supports full SimNet data rates up to 1 Mbps, with low latency for real-time chartplotting and radar overlays.
• Certifications: Meets NMEA and Simrad standards for plug-and-play certification.

Compatibility with Simrad and Beyond

This cable shines in Simrad-heavy setups, linking Micro-C devices directly to NSS, NSO, or NSX series multifunction displays via the SimNet backbone. It’s also ideal for integrating NMEA 2000 peripherals from brands like Airmar (transducers), Maretron (instrumentation), or Actisense (gateways) into your Simrad network.

Pro tip: Pair it with SimNet T-joints or drop cables for star or daisy-chain topologies, maximizing flexibility on sailboats, center consoles, or offshore cruisers. Always ensure your backbone is properly terminated to avoid network errors.

Easy Installation Guide

Installation is straightforward, even for DIY boaters:

1. Power down all devices and disconnect batteries.
2. Locate an available Micro-C port on your NMEA 2000 device.
3. Plug the female Micro-C end securely into the device.
4. Route the cable neatly along your backbone and connect the SimNet end to a free port or T-connector.
5. Power up and verify network recognition via your Simrad display’s diagnostics menu.

No soldering or custom crimping required – just plug and go. For best results, use cable ties to secure routing away from high-heat engine areas.

Real-World Applications and Benefits

Imagine effortlessly sharing wind data from a NMEA 2000 anemometer across your entire Simrad fleet, or overlaying engine telemetry on a secondary display during long passages. This cable eliminates single points of failure, reduces wiring clutter, and future-proofs your setup for software updates.

Boat owners report fewer dropouts and faster boot times after swapping generic cables for Simrad originals, thanks to optimized impedance matching and strain relief. It’s a small investment that pays off in reliability during critical moments, like fog-bound approaches or night fishing runs.

Care and Maintenance Tips

To maximize lifespan:

• Inspect connectors quarterly for salt buildup; rinse with fresh water.
• Avoid sharp bends (minimum radius 50mm).
• Store spares in a dry locker during off-season.
• If issues arise, check for bent pins before assuming cable failure.

Frequently Asked Questions

What devices does the Simrad Micro-C Female to SimNet Cable connect?

It connects NMEA 2000 devices with Micro-C ports to SimNet networks, including sensors, transducers, and displays from Simrad and compatible third-party brands.